1. Jack up passanger side of car and place on jack stands.

2. Remove wheel and plastic wheel well shroud.

3. Loosen crank bolt and remove. You will need air tools to remove bolt.

4. Loosen tensioners and remove alt - A/C belt. You will reuse the wp-ps belt.

5. Use puller to remove stock crank pulley.

6. Install new crank pulley applying grease to bore . This will aid in the install.

7. Tighten crank bolt to 110 ft. lbs.

8. Install new belt and existing wp-ps belt.

9. Tighten tensioners.

10. Replace wheel shroud and wheel.

11. Lower car and start to check for proper installation.

New Belts;

Alt- A/C K060390
WP-PS retains the stock belt