Auto Specialties recommends that these pulleys be installed by a qualified mechanic.

CAUTION: Ensure car is properly secured on jack stands before accessing underside of car.

1. Jack up vehicle, place jack stand under frame.

2. Remove wheel and well shroud if necessary.

3. Loosen crankshaft belt.

4. Loosen alternator, A/C and power steering tensioner bolts, if necessary, to get belts off.

5. Remove old belts.

6. Remove crankshaft pulley bolt and crankshaft pulley.

7. Install the uderdrive pulley with multi-purpose grease or oil on the inner bore.

8. Torque crankshaft pulley to 110 ft/lbs.

9. Install new belts on A/C, altrnator and power steering.

10. Tighten belts to factory specifications.

11. Reinstall wheel and well shroud if removal for installation was required.