1. Jack up driver side wheel and set on jack stands.

2. Remove wheel and plactic wheel shroud covering crank pulley.

3. Loosen and remove crank pulley bolt. You will need air tools for this.

4. Loosen tensioners and remove belts. For the A/C you will have to remove the lower mount to get the belt off and install the new one.

5. Remove crank pulley. Be careful not to loose the key from the crank.

6. Coat inner bore of ASP pulley with grease to aid in the install.

7. Seat new pulley aligning to key way in crank and retighten crank bolt to 133 ft lbs.

8. Install new belts and retighten tensioners. Replace lower mount.

9. Reinstall plastic wheel shroud and wheel.

10. Crank car and check for proper installation.

11. Remove jack stands.

New Belts;

Alt. K040310
PS K040365
A/C K040330