Auto Specialties recommends that these pulleys be installed by a qualified mechanic.

1. Jack up vehicle, place jack stand under frame.

2. Remove wheel and well shroud if necessary.

3. Loosen crankshaft bolt.

4. Loosen alternator, A/C and power steering tensioner bolts, if necessary, to get belts off.

5. Remove old belts.

6. Remove crankshaft pulley bolt and crankshaft pulley.

7. Install the underdrive pulley with multi-purpose grease or oil on the inner bore.

8. Torque crankshaft pulley to 110ft/lbs.

9. Install new belts on A/C, alternator and power steering.

10. Tighten belts to factory specifications.

11. Reinstall wheel and well shroud if removal for installation was required.

Belt Sizes
K040320
7450