Auto Specialties recommends these pulleys be installed by a qualified mechanic.

1. JACK UP FRONT OF CAR, PLACE JACK STANDS UNDER PASSENGER SIDE FRAME. PLACE BLOCKS BEHIND REAR WHEELS TO PREVENT CAR FROM ROLLING BACK.

2. REMOVE RIGHR WHEEL.

3. REMOVE UNDERSIDE PLASTIC BODT PIECE.

4. REMOVE CRANK BOLT. LOOSEN BELT AND REMOVE CRANK PULLEY.

5. REMOVE LOWER TIMING DUST COVER. YOU WILL NOT NEED TO PUT IT BACK ON. PLACE SCREWS BACK INTO HOLES TO PREVENT BLOCKAGE.

6. PUT ON NEW ASP CRANK PULLEY. APPLY LOCTITE #242 OR EQUIVALENT TO SECURE BOLT. TIGHTEN BOLT TO 80-100 FT/LBS.

7. FOR ESCORT INSTALL NEW GATES BELT K060845. REPLACE ALL PARTS IN REVERSE ORDER. TURN ON VEHICLE AND INSPECT FOR PROPER BELT ALIGNMENT AND INSURING THAT THE NEW INSTALLED PULLEY DOES NOT WOBBLE.

BELTS

3.0L ESCAPE , K060810

CONTOUR 95-99 K060721 W/O A/C K060670

FOCUS ZX2 00 K060825