Auto Specialties recommends these pulleys be installed by a qualified mechanic.

1. Jack up front of car, place jack stands under passenger side frame. Place blocks behind rear wheels to prevent car from rolling back.

2. Remove right wheel.

3. Remove underside plastic bolt piece

4. Remove Crank bolt. Loosen belt and remove crank pulley.

5. Remove lower timing dust cover. you will need to put it back on. Place screws back intoholes to prevent blockage.

6. Put on new ASP crank pulley. Apply Loctite #242 or equivalant to secure bolt. Tighten bolt to 80-100 LB-FT.

7. Replace all parts in reverse order. Turn on vehicle and inspect for proper belt alignment and check that pulley does not wobble.

BELTS
Escape K060810
Contour K060721 w/o A.C. K060670
Focus ZX2 K060845